Hubdisk-2

Hubdisk-2
Funktion
Incremental
Kategorie
Disk
Auflösung
64-10000
Gehäuse Ø [mm]
51.2
Wellen Ø [mm]
2, 3, 3.175, 4, 4.76, 5, 6, 6.35, 7, 8, 9.52, 10, 12, 12.7, 14, 15.875, 19.05, 20, 22.225, 25, 25.4
Temp. Bereich [°C]
-40 to +100
Hersteller
US Digital
Produktbeschreibung

US Digital offers a wide variety of standard HubDisk assemblies (optical encoder disk attached to an aluminum hub) to aid with mounting on to a shaft. Encoder disks may also be ordered as a stand alone item (see the Disks page). The rotary encoder disks are made from 0.007'' thick Mylar polyester film and the material allows for a -40C to 100C temperature range. The disk on the HubDisk assembly comes attached with the emulsion side up when the disk text is correct reading. HUBDISK-2 consists of a precision machined aluminum hub fastened to a 2'' diameter optical encoder disk (DISK-2). One or two set screws (depending on the hub's ID) are used to fasten the hub to a shaft. The HubDisk assembly is available with bore sizes ranging from 2 mm to 1 inch. All HubDisk assembly bores are held to a very tight tolerance defined by US Digital Technical Bulletin Shaft and Bore Tolerances TB1001.