Pressure sensor CCD54 - analogue or digital

Intelligent pressure sensor for medical technology and HVAC

The CCD54 is an intelligent, calibrated and amplified OEM pressure sensor. Its offset correction, sensitivity, temperature drift and linearity are stored in the on-chip EEPROM directly at the factory using the latest ASIC technology. Different initial configurations are possible, such as the response time or supply voltage. By default, the sensor is operated at 4.75 to 5.25 VDC and thus has a signal of several volts on its output. However, it can also be adapted to a supply voltage of 2.75 to 3.3 VDC with a ratiometric output signal.

Depending on the measurement range, accuracy overall is 1.8 to 2.2% over the entire temperature range of 0 to 50 °C. The temperature range can optionally be extended to 0 to 85 °C.

Digital technology is increasingly common even in these small sensors. The same sensor is also available with an I2C or SPI interface with a selectable sampling rate of 8 Hz, 40 Hz, 200 Hz or 1 kHz. Here, too, supply voltages of 2.75 to 3.3 VDC or 4.75 to 5.25 VDC are supported.

The smallest measurement range is 0 to 2 mbar and the greatest is 10 bar for absolute pressure, overpressure, underpressure or differential pressure. Customer-specific measurement ranges are possible even for smaller lot sizes.

Typical applications of this intelligent CCD54 pressure sensor can be found in medical and laboratory technology, in heating, ventilation, air technology and process metrology, in leak measurement and in pneumatics.

Download datasheet

Product not found?

We have a range of additional products and customized solutions.

Please send us your
or call us.