Disk-1

125-20-202-004-BL-0809.png
Fonction
Incremental
Catégorie
Disk
Résolution
32-5000
Ø Boiter [mm]
25.4
Axes Ø [mm]
2.36, 3.175, 9.52, 11.2
Plage de temp. [°C]
-40 to +100
Fournisseur
US Digital
Description du produit

US Digital offers a wide variety of standard rotary encoder disks. They may be ordered as a stand alone disk (see below) or as a hub disk (see the Disks page). These rotary encoder disks are made from mylar polyester film. This material allows for a wide temperature range. DISK-1 has an outer diameter (OD) of 1''. We recommend that the shaft or hub diameter the disk is designed to fit be .001'' to .002'' larger than the disk hole diameter (ID). This gives an interference fit that ensures disk concentricity. The drawings shown represent our standard disks. The maximimum allowed RPM of the disk is typically limited by the maximum output frequency of the encoder module. The maximum allowed RPM is calculated as follows: Max. RPM = (60 * Fmax) / CPR Where Fmax = maximum encoder module output frequency and CPR is the Cycles per Revolution of the disk. Only the No Index, EM1 Compatible option (NE) is available with the 32 CPR option. Other resolutions are available with or without an index track. Mechanical alignment drawings for optical encoder rotary disks and optical encoder modules are available.

Désormais avec une résolution 4 fois plus élevée : 2000 à 5000 cycles par tour

En savoir plus
Produit pas trouvé?

Découvrez le reste de notre assortiment ainsi que nos solutions sur mesure.

Veuillez nous envoyer votre demande où appelez-nous.