MA3

125-03-202-001-BL-0809.png
Fonction
Absolute, singleturn, magnetic
Type d'Axe
Shaft
Axes Ø [mm]
3.2 , 6, 6.4
Résolution [bits] monotours
10-12
Ø Boiter [mm]
12.2
Tension d'alimentation [V]
4.5 ... 5.5
Sortie
0..5V, PWM
Plage de temp. [°C]
-40 to 125
Fournisseur
US Digital
Description du produit

The MA3 is a miniature rotary absolute shaft encoder that reports the shaft position over 360° with no stops or gaps. The MA3 is available with an analog or a pulse width modulated (PWM) digital output. Analog output provides an analog voltage that is proportional to the absolute shaft position. Analog output is only available in 10-bit resolution. PWM output provides a pulse width duty cycle that is proportional to the absolute shaft position. PWM output is available in 10-bit and 12-bit resolutions. While the accuracy is the same for both encoders, the 12-bit version provides higher resolution. Three shaft torque versions are available. The standard torque version has a sleeve bushing lubricated with a viscous motion control gel to provide torque and feel that is ideal for front panel human interface applications. The no torque added option has a sleeve bushing and a low viscosity lubricant (that does not intentionally add torque) for low RPM applications where a small amount of torque is acceptable. The ball bearing version uses miniature precision ball bearings that are suitable for high speed and ultra low torque applications. The shaft diameter for ball bearing version option is 1/8'' rather than 1/4''. Connecting to the MA3 is simple. The 3-pin high retention snap-in 1.25mm pitch polarized connector provides for +5V, output, and ground.

Magnétorésistif à haute précision et résolution 13-Bit

En savoir plus
Produit pas trouvé?

Découvrez le reste de notre assortiment ainsi que nos solutions sur mesure.

Veuillez nous envoyer votre demande où appelez-nous.